Home / Products / IBM/TOSHIBA POS Terminal Parts
TOSHIBA SUREPOINT 4820 Screen MSR Crad reader Use for 4820-2LG 4820-5LG
Product Inquiry
Category: IBM/TOSHIBA POS Terminal Parts
All parts are original new, tested before shipping. We can give you a good price, especially for big orders.
Price on inquiry — fastest delivery in 3 Days worldwide.
Email: leoli020@163.com
Tel: +86-15914391946 · WhatsApp: +8615914391946
Description
What DS4820AISB1A1A Is
DS4820AISB1A1A is the part-number reference used on this page for the Toshiba SurePoint 4820 screen and MSR card-reader item associated with the 4820-2LG and 4820-5LG terminal references. It identifies a display and magnetic-stripe-reader hardware area, not a complete terminal.
If you found this page through a service label, repair ticket, or parts list, start by confirming that the number on your unit matches exactly before comparing photos, connectors, or mounting points. A screen and MSR assembly can look similar across POS terminal families, and one different character in a part number can send a repair down the wrong path.
The page topic combines several identifiers that should be checked together:
- DS4820AISB1A1A: the part number to match character by character.
- Toshiba SurePoint 4820: the terminal family context.
- Screen and MSR card reader: the display and magnetic-stripe-reader hardware area to compare with the old unit.
- 4820-2LG and 4820-5LG: terminal references named in the page topic.
Do not assume that every 4820 variant uses the same hardware until the label and old part have been checked. For a repair buyer, the part number alone is a starting point, not the whole identification. The safer approach is to match the number, the terminal reference, and the physical layout of the old assembly. That is especially important when a terminal has been serviced before, because the part fitted in the field may not be the same as the original build list.
What It Fits: 4820-2LG and 4820-5LG
The DS4820AISB1A1A reference is tied to the Toshiba SurePoint 4820 family, with 4820-2LG and 4820-5LG named as the terminal references on this page. Those references tell you which 4820 version you are working on, but they do not by themselves confirm that a given screen and MSR assembly will drop into your unit.
Fit depends on more than the terminal name. The display cut-out, the card-reader opening, the fixing points, the connector type, and the cable routing all have to match the old assembly. A part can belong to the right terminal family and still be wrong for the exact configuration on your bench.
Use the checks below before you request a quotation. The aim is to reduce the risk of ordering a screen or MSR item that fits the family but not the unit.
| Check | Why it matters | Practical step |
|---|---|---|
| Terminal label | The terminal reference tells you which 4820 version you are working on. | Photograph the model and serial label before removing parts. |
| Old part label | The fitted part may carry a label, sticker, or stamped number. | Capture the full label and any nearby barcode in a sharp close-up. |
| Part-number characters | Similar Toshiba 4820 references can differ by only a few characters. | Compare DS4820AISB1A1A against the old label one character at a time. |
| Screen and MSR layout | The display area and card-reader area must match the terminal cut-out and fixing points. | Photograph the front, back, cable exit, and mounting points. |
| Connectors and cable routing | A visually similar assembly may not connect safely or route correctly. | Include photos of every connector and note any locking tabs or cable bends. |
| Scope of supply | Screen, MSR reader, bezel, cable, and mounting hardware may not all be included in the same item. | Confirm what is supplied before treating the part as a complete drop-in assembly. |
If the label is faded or missing, do not rely on appearance alone. Wide photos of the terminal and close photos of the screen and MSR area are more useful than a single front-facing image because they show how the part sits in the housing.
How to Verify the Correct Assembly
A reliable verification process is mostly about evidence. Collect the details below before you remove the old part or place an inquiry.
- Write down the terminal model exactly as shown on the label. Check for 4820-2LG, 4820-5LG, or another 4820 reference.
- Record the full part number from the old screen or MSR item. Keep the spaces, hyphens, and character order visible where possible.
- Photograph the old assembly from several angles: front, back, label, connector side, and mounting area.
- Note whether the card reader is part of the same unit as the screen or a separate module on your terminal.
- Check the condition of the cable and connector before assuming the screen or MSR reader is the only item that needs replacement.
If any detail does not match DS4820AISB1A1A, ask for a compatibility check rather than ordering by appearance. This process also helps when a terminal has been through previous repairs. The service history may explain why the fitted part looks different from the expected assembly, and that difference should be resolved before a replacement is chosen.
What to Include in a Replacement Inquiry
A clear inquiry saves time because the part can be checked against the terminal and old hardware without a long back-and-forth. Include the following details where available:
- The exact terminal reference, such as 4820-2LG or 4820-5LG.
- The part number DS4820AISB1A1A and any other number printed on the old unit.
- Photos of the terminal label and the old screen or MSR assembly.
- A close-up of the connector and cable area.
- The quantity required.
- Whether the request is for a single repair, a spare-parts kit, or a planned replacement.
- Any mismatch between the old part label and the part number shown on this page.
If the terminal is still in service, note whether the screen, the card reader, or both areas are involved. That helps separate a display concern from an MSR concern and prevents the wrong assembly from being quoted.
Handling and Replacement Planning
Screen and MSR hardware should be handled with the same care as other POS terminal components. Power the terminal down before inspection, follow the terminal service documentation for removal and reassembly, and use anti-static precautions when handling the assembly.
Plan the replacement around the repair window rather than the part alone. Confirm that the replacement will be checked against the terminal reference and old hardware before it is fitted, and keep the old assembly and its label available until the new part is verified. If the terminal is part of a larger POS estate, record the part number and terminal reference so future repairs can be matched to the same configuration.
Quick Answer
DS4820AISB1A1A is the part-number reference for the Toshiba SurePoint 4820 screen and MSR card-reader item associated with the 4820-2LG and 4820-5LG terminals. It fits when the terminal reference, the old part label, the screen and MSR layout, and the connectors all match. Confirm those details before ordering, because a part from the same terminal family can still be wrong for the exact configuration on your bench.


